List of products by brand MikroTik

The cAP is a ceiling-mounted, dual-chain 2.4GHz access point designed for seamless integration into environments like hotels, airports, and malls. It supports 802.3at/af PoE and centralized management via MikroTik CAPsMAN.

The MikroTik TOF-2400-8V-4 is an 8 dBi 2.4 GHz omni antenna designed for the wAP LR2 kit — extending LoRa® gateway coverage up to 3–4 km line of sight while also supporting standard 2.4 GHz WLAN. Includes a 1-metre SMA cable for remote antenna positioning and a mechanical holder for quick mast attachment. Compact, durable, and ready to deploy out of the box. The correct external antenna upgrade for any wAP LR2 deployment where the internal antenna does not provide sufficient coverage.

The MikroTik 868 Omni Antenna is a 6.5 dBi, IP66-rated omni antenna for LoRa® deployments in the 862–876 MHz band — redesigned from community feedback with higher durability, improved cable durability, and full IP66 water resistance in a smaller package. Includes a 1m SMA male-to-male cable, fastening set, and mechanical holder for 25–50 mm mast or wall mounting. Rated for marine and coastal environments. The 862–876 MHz frequency range does not cover the Canadian 915 MHz LoRa® band — confirm frequency compatibility before ordering.**

The MikroTik TOF-2400-8V-4 is a 2.4 GHz 8 dBi omnidirectional antenna — dual-purpose for both 2.4 GHz LoRa and 2.4 GHz WLAN simultaneously, SMA connector, 1m SMA cable included, mechanical mast holder for quick vertical mounting, up to 3–4 km line-of-sight coverage claimed by MikroTik. Compact, outdoor-durable construction. Primary pairing: wAP LR2 kit and R11e-LR2 mini PCIe gateway card. Compatible with any 2.4 GHz device using SMA connector. Passive antenna — no electronics, no firmware, no certification required. Includes 1m SMA cable + mast mechanical holder. USD 49.00.

The MikroTik LDF 5 (RBLDF-5nD) is a dual-chain 5GHz outdoor wireless system designed to be mounted at the focal point of a standard offset satellite dish antenna, transforming an inexpensive readily-available dish into a high-gain long-distance wireless link. The LDF (Lite Dish Feed) has its own built-in 9 dBi antenna, but when paired with a satellite dish of up to 100 cm in diameter, total antenna amplification of up to 33 dBi can be achieved — enabling powerful point-to-point links at ranges that a conventional CPE could not reach. Supporting 802.11a/n (Wi-Fi 4) and running MikroTik RouterOS, the LDF 5 is a uniquely cost-effective solution for WISPs, network integrators, and installers who need long-range 5GHz connectivity without the expense of a dedicated high-gain dish antenna unit.

The MikroTik GB60A-S12 is a 12V 5A internal replacement or secondary power supply unit designed specifically for the CCR1016 router series. Compatible exclusively with the newer r2 revisions of the CCR1016 that support dual power supplies, it provides a genuine MikroTik-sourced internal PSU for redundancy or direct replacement purposes. With an MTBF of approximately 100,000 hours at 25°C and a tested operating temperature range of -20°C to 70°C, it is a reliable internal power solution for CCR1016 deployments in professional networking environments.

The RBFTC11 is a robust Fiber-to-Copper media converter in a weatherproof enclosure, designed for outdoor deployments. It supports 12-57V PoE with 802.3af/at and works exclusively with Gigabit SFP connections.

SFP 1.25G module for 80km links with Dual LC-connector

The R11e-2HnD is a compact, low-power 2 GHz miniPCIe wireless card, specifically designed for devices requiring a low-profile solution, such as laptops or other compact enclosures. This card supports dual-chain 802.11b/g/n and features u.Fl connectors, making it ideal for applications where space and power efficiency are critical.

The MikroTik RBGPOE-CON-HP is a rugged Gigabit PoE voltage converter that steps 48V PoE input (Passive PoE, Telecom PoE, 802.3af, or 802.3at — any 42–57V source) down to 24V Passive PoE output at up to 1A (24W) — powering any 8–30V RouterBOARD device from a 48V PoE infrastructure without a separate power adapter or injector. Two Gigabit Ethernet ports, integrated heatsink in a rugged metallic case, wall-mountable, shielded Ethernet support. The correct solution when your PoE switch delivers 48V and your RouterBOARD device needs 24V.