Hardware

The MikroTik CRS328-24P-4S+RM is a 28-port 1U rackmount switch with 24 PoE Gigabit ports, 4x 10G SFP+ ports, dual boot OS, and a 500W power supply for versatile networking.

The MikroTik CCR2004-16G-2S+PC is a passively cooled cloud core router — quad-core ARM64 Amazon Annapurna Labs AL32400 (Alpine v2) at 1.2 GHz, 2× Marvell 88E6191 switch chips, 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 16× Gigabit Ethernet (2× groups of 8, each with dedicated 10G CPU uplink), 2× SFP+ (10G), RJ45 serial console, 1× USB, 2× DC inputs (DC jack + 2-pin terminal, 36–57V), 36W max / 30W without attachments, fully passive cooling, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, 48V 0.95A adapter, K-83 kit. USD 465.00.

The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.

The MikroTik CRS418-8P-8G-2S+RM is the wireless-free 1U rackmount edition of the CRS418 platform — all the switching, routing, PoE, and 10G uplink capability of the CRS418 series without the Wi-Fi 6 radio. It combines 16× Gigabit Ethernet ports (8 with 802.3af/at PoE-out), a dedicated Gigabit management port, 2× 10G SFP+ uplinks, the quad-core IPQ-8072A 2.2 GHz ARM64 CPU with L3 hardware offloading, 1 GB RAM, dual redundant AC power supplies, USB 3.0, and RouterOS v7 License Level 5 — a clean, no-compromise rackmount switch-router for environments where Wi-Fi is handled separately or not needed at all.

The MikroTik ATL 5G R16 (ATLGM&RG520F-EU) is MikroTik's first outdoor 5G CPE with built-in eSIM — a rugged, IP66-rated, snow-resistant outdoor unit combining a 16 dBi high-gain directional antenna array (4× mid-band + 4× low-band), 5G Release 16 modem with LTE Cat 20, 4×4 MIMO, full Band 28 support for rural low-band coverage, eSIM with MikroTik Connectivity alongside Micro SIM, 1× Gigabit Ethernet with 802.3af/at PoE-in, dual-core ARM64 88F3720 CPU at 800 MHz, 512 MB RAM, passive cooling, and RouterOS v7 License Level 3. Install it on any rooftop, pole, or mast, power it with a single PoE cable, and be online in minutes with no SIM card required.

The MikroTik Wireless Wire Cube Pro (CubeG-5ac60aypair) is a preconfigured point-to-point kit of two Cube 60Pro ac devices — 802.11ay 60 GHz primary link (up to 2.4 km tested), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V) per unit, GPS, passive cooling, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 2× cube mount brackets, 2× 24V 0.8A adapters, 2× hose clamps, 2× GbE PoE injectors. USD 298.00 per pair.

The MikroTik netPower 16P (CRS318-16P-2S+OUT) is a compact outdoor 18-port dual-boot PoE switch — 98DX226S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 16× GbE 802.3af/at PoE-out (Ether1–16) + 2× SFP+ 10G, 36 Gbps non-blocking throughput, 72 Gbps switching capacity, 53.6 Mpps forwarding rate, dual DC jack input (18–30V or 48–57V), 316W max / 16W without attachments, no onboard voltage converter, passive cooling, IP54, 303 × 212 × 78 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, 2× DC to terminal block adapters. Power supply NOT included.

The MikroTik CRS309-1G-8S+IN is a compact desktop switch with 8x 10G SFP+ ports, 1 Gigabit Ethernet port, dual boot OS, and advanced network performance.

The MikroTik FiberBox Plus is a compact, ruggedised outdoor fibre switch designed for high-mast, pole, and tower deployments where reliable 10-Gigabit connectivity is needed in the field. Built around the Marvell 98DX226S switch chip with a 32-bit ARM CPU running at 800 MHz and 256 MB of RAM, it features one Gigabit Ethernet port and four 10G SFP+ ports, giving it a significant throughput advantage over its predecessor. It runs both RouterOS v7 and SwOS, offering flexibility between full-featured routing and streamlined switch management. Three power input options — 802.3af/at PoE-in, a DC jack, and a 2-pin terminal — make it easy to integrate into existing outdoor deployments. With an IP66 water-resistance rating providing protection against powerful water jets from any direction.

The MikroTik CSS610-8P-2S+IN is a compact managed PoE switch — Marvell 88E6193X switch ASIC, 64 KB FLASH, SwitchOS Lite, 8× Gigabit Ethernet with 802.3af/at + passive PoE-out (140W total budget, 1000 mA low-voltage / 625 mA high-voltage per port), 2× SFP+ (10G), AC input 100–240V + DC jack 48–57V, 162W max / 12W without attachments, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K-48 fastening set, IEC cord. USD 229.00. Browser-configurable managed PoE switch for home, SMB, hotel, call centre, and IP camera deployments.