Accessories

The MikroTik G1483 is a 6Ah LiFePO4 lithium iron phosphate battery backup unit designed for the MikroTik RB5009UG+S+IN, RB5009UPr+S+IN, RB5009UG+S+IN, and the hEX refresh (E50UG) — delivering 21.6Wh of backup energy at 3.6V nominal from a 1× 18650-format LiFePO4 cell array, with integrated charge management, over-discharge protection, and a battery health indicator. Dimensions 132 × 74 × 27 mm, weight 260 g. USD 39.00. The correct battery backup unit to stock alongside any RB5009 or hEX refresh deployment where brief power interruption must not result in router reboot, configuration loss, or network downtime.

Pre-terminated Category 6 (Cat6) solid U/UTP cable — 4-pair, 350 MHz, 24 AWG, CMR-rated.

The PW48V-12V150W is a hot-swap -48V DC telecom power supply, designed for seamless replacement in MikroTik devices such as the CCR2216, CRS518, and CRS520. It supports an input voltage range of -36 to -57V, ensuring reliable power delivery for critical network installations without requiring a device restart.

The 12POW150 is a hot-swap 12V 150W AC/DC power supply designed for MikroTik CCR2216 and CRS518 units. It ensures zero downtime by providing seamless replacement without restarting devices.

The MikroTik MTP250-26V94-OD is an outdoor AC/DC power supply unit — 26V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for the MikroTik netPower outdoor switch product line and 12–30V outdoor access points and devices, pole/wall mount compatible, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Companion variant: MTP250-53V47-OD (53V 250W for higher-voltage devices such as PTZ cameras). CE, EAC, RoHS certified. No RouterOS — standalone power supply unit. USD 99.00.

The MikroTik MTP250-53V47-OD is an outdoor AC/DC power supply unit — 53V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for MikroTik netPower outdoor switches and devices requiring above-30V DC input, pole/wall mount compatible, 2× hose clamps included for mast mounting, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Primary use case: PTZ security camera networks and higher-voltage outdoor switch deployments. Companion variant: MTP250-26V94-OD (26V 250W for 12–30V devices). CE, EAC, RoHS certified. No RouterOS — standalone PSU. USD 99.00.

The MikroTik UP1302C-12 is a 130W open frame internal AC/DC power supply — 90–264V AC input, 12V DC 10.8A output, 130W, 55 × 106 × 34 mm. Replacement and redundant PSU for CRS326-24S+2Q+RM, CCR2116-12G-4S+, CCR1036-12G-4S r2, CCR1036-12G-4S-EM r2, CCR1036-8G-2S+ r2, and CCR1036-8G-2S+EM r2. Compatible only with r2 revisions of the CCR1036 series — original revisions use a different PSU format. MTBF approximately 100,000 hours at 25°C. EAN 0708747438888. UP1302C-12-Kit variant includes C14 plug socket with locking power cord clip and wire harness.

The MikroTik GPeRx4 is an IP68-rated outdoor PoE splitter — taking a single 802.3bt 90W PoE-in port and distributing it across three independent 802.3af/at PoE-out ports (Ether2–Ether4), each delivering up to 30W, with a fourth port (Ether1) as the PoE-in uplink. SwOS Lite managed with VLAN, SNMP, traffic shaping, interface monitoring, and GPEN fault detection. 802.3bt PoE-in (48–57V) plus 2-pin terminal input (24–57V), Marvell 88E6341 switch chip, 200 MHz CPU, 64 KB FLASH, 4W without attachments and 115W max, -40°C to +70°C, MTBF ~100,000 hours at 25°C. Includes hose clamp. CE, EAC, and RoHS certified.

The MikroTik CADDY is a 10-pack of replacement NVMe drive tray inserts purpose-built for the MikroTik ROSE Data server (RDS). Each tray provides quick, secure NVMe drive mounting within the RDS chassis — allowing drives to be installed, swapped, or replaced cleanly without improvised mounting solutions. At USD 49 for a pack of 10, the CADDY is the essential on-site spare for any ROSE Data server deployment where NVMe drives are added, replaced, or rotated over the server's operational life.

The MikroTik SR-10U SolidRack 10 is a 19" 10U desktop rack — adjustable angle, aluminium construction, rear multi-plug extension cord attachment point, cable management space, includes screws for 10 devices plus rack mounting hardware. Compatible with all standard 19" rack-mount devices from MikroTik and other vendors. With the optional K-79 accessory kit, fits up to 4× RB5009UG+S+IN routers per 1U (40 RB5009 total). Mount under a desk, on a desk, or on a bench. No electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Suggested price USD 49.00.