GPEN (Gigabit Passive Ethernet Network)

GPEN

MikroTik GPEN concept can replace any existing or future GPON solution. It provides all the benefits of GPON but utilizes well-proven, simple and inexpensive Ethernet solutions.GPEN ConceptGPEN ConceptGPEN doesn’t require expensive GPON OLT equipment in your server rooms, just a regular switch port! Similar to GPON, the GPEN solution will require clients to provide power, but instead of powering GPON’s ONT device, power will be used for extending the Ethernet cable (with our GPeR devices) and powering the netPower device. That is the GPEN analogue of GPON splitters – netPower provides additional functionality and possibilities. And the best part of this technology – it gives you all the flexibility for a fraction of the price. You can connect netPower to your server room by Ethernet, Active optical line or use it to power one end of point-to-point backbone wireless link. GPEN – the evolution of GPON done right!

 Show Moreexpand_more
 Show Lessexpand_less
MikroTik netPower 15FR Outdoor Reverse PoE Switch
MikroTik netPower 15FR Outdoor Reverse PoE Switch
Available!
The MikroTik netPower 15FR (CRS318-1Fi-15Fr-2S-OUT) is a compact outdoor reverse PoE switch for MikroTik's GPEN concept — 98DX224S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 15× 10/100 reverse PoE-in (18–57V passive) + 1× 10/100 (Ether15, passive PoE-out) + 1× 10/100 fiber uplink (Fi) + 2× SFP, 3.6 Gbps non-blocking throughput, 7.2 Gbps switching capacity, 5.4 Mpps forwarding rate, 16 DC inputs (DC jack + passive PoE-in 18–57V, recommended 36–57V), 29W max / 10W without attachments, passive cooling, IP54, 304 × 212 × 71 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, DC to terminal block adapter. Power supply NOT included.
US$169.00
MikroTik GPERx6 Outdoor Hybrid Fiber PoE Switch DC
MikroTik GPERx6 Outdoor Hybrid Fiber PoE Switch DC
Available!
The MikroTik GPERx6 (CSS606-1G-2Gi-3S+OUT) is a rugged IP66 outdoor switch purpose-built for deployments where running separate power and data cables over long distances is impractical. Using hybrid fiber + copper cables, it carries 10G fiber data and DC power simultaneously over distances of 1–2 km — then splits them at the far end into 3× 10G SFP+ uplinks, 2× Gigabit Ethernet PoE-out ports, and 3× DC outputs for IoT gear and devices that do not support PoE. Built for perimeter surveillance, remote CCTV towers, solar-powered edge sites, and industrial campuses where every cable run matters.
US$139.00
MikroTik netPower Lite 7R Outdoor Reverse PoE Switch
MikroTik netPower Lite 7R Outdoor Reverse PoE Switch
Available!
The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.
US$139.00
MikroTik GPeRx4 90W PoE Splitter 3-Port PoE-Out IP68
MikroTik GPeRx4 90W PoE Splitter 3-Port PoE-Out IP68
Available!
The MikroTik GPeRx4 is an IP68-rated outdoor PoE splitter — taking a single 802.3bt 90W PoE-in port and distributing it across three independent 802.3af/at PoE-out ports (Ether2–Ether4), each delivering up to 30W, with a fourth port (Ether1) as the PoE-in uplink. SwOS Lite managed with VLAN, SNMP, traffic shaping, interface monitoring, and GPEN fault detection. 802.3bt PoE-in (48–57V) plus 2-pin terminal input (24–57V), Marvell 88E6341 switch chip, 200 MHz CPU, 64 KB FLASH, 4W without attachments and 115W max, -40°C to +70°C, MTBF ~100,000 hours at 25°C. Includes hose clamp. CE, EAC, and RoHS certified.
US$59.00
MikroTik GPEN21 Smart PoE Injector SFP Repeater
MikroTik GPEN21 Smart PoE Injector SFP Repeater
Available!
The MikroTik GPEN21 is a smart power injector and software-controlled Ethernet repeater — Marvell 88E6341 switch chip, SwitchOS Lite, 2× GbE (Ether1 data-in + Ether2 passive PoE-out up to 57V) + 1× SFP port for fiber uplink, dual power input (DC jack 12–57V + 802.3af/at PoE-in), 30W max / 3W without attachments, mode button, passive cooling, IP20, -20°C to +70°C, MTBF ~100,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Wall or cabinet mountable. Includes K-62 kit. Free software updates for life of product or minimum 5 years from purchase.
US$40.00
GPeR: Extend Ethernet Connections up to 1,500 Meters
GPeR
Available!
The GPeR is a Gigabit Passive Ethernet Repeater that extends Ethernet connections up to 1,500 meters by adding hops of 100-210 meters between devices. It's a cost-effective solution for overcoming cable length limitations in large or multi-story buildings.
US$29.00
MikroTik GPEN11 Wall-Mount Passive PoE Injector
MikroTik GPEN11 Wall-Mount Passive PoE Injector
Available!
The GPEN11 is a wall-mountable power injector designed to power uplink devices with PoE. As part of the GPEN (Gigabit Passive Ethernet Network) concept, it provides a cost-effective and easily deployable alternative to traditional GPON installations.
US$14.00
MikroTik GPeR-IP67-Case IP68 Outdoor Enclosure
MikroTik GPeR-IP67-Case IP68 Outdoor Enclosure
Available!
The MikroTik GPeR-IP67-Case is a weatherproof outdoor enclosure designed exclusively for GPeR units — IP68 rated (dust-tight and submersion-proof despite the IP67 name on the label), wall and pole mountable, suitable for extending Ethernet networks in mines, caves, maintenance shafts, and outdoor installations. Product code GPeR-IP67-Case. EAN 4752224008374. No active electronics — passive mechanical enclosure accessory. MTBF approximately 100,000 hours at 25°C. Dimensions not published by MikroTik.
US$7.00