List of products by brand Synoxx

The SYNOXX ES-T5-R-3 is a 10GBase-T SFP+ copper transceiver supporting 
multi-rate 10G/5G/2.5G/1G Ethernet over RJ45, with a 30m reach on Cat 6a/7 
cable. Hot-pluggable, RoHS compliant, and IC certified for Canada and the US.

The SYNOXX EB23X-10D/EB32X-10D is a matched 10G SFP+ BiDi transceiver pair enabling 
bidirectional 10Gbps transmission over a single strand of single-mode fiber up to 10km, 
using complementary wavelengths of 1270nm TX/1330nm RX and 1330nm TX/1270nm RX. 
Supports data rates up to 10Gbps with Digital Diagnostic Monitoring (DDM), DFB 
transmitter, APD receiver, and power consumption of ≤1.5W per module, compliant with 
IEEE 802.3ae and SFP+ MSA standards. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ESP852X-01D is a 25G SFP28 SR optical transceiver delivering 25.78Gbps 
transmission over multimode fiber — up to 100m on OM4, 70m on OM3, and 20m on OM2 
— using an 850nm VCSEL laser and PIN photodiode, purpose-built for high-density 25G 
Ethernet switching, 5G CPRI fronthaul, and 100G breakout target deployments. 
Features a hot-pluggable SFP28 form factor, LC duplex connector, and Digital 
Diagnostic Monitoring (DDM) via SFF-8472, with low power consumption and compliance 
with IEEE 802.3cc and SFF-8402 standards. Hot-pluggable, RoHS compliant, and IC 
Certified.

The SYNOXX EDQPY-1 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a 
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf 
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX EDSP2X-3 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 3-metre twinax connection — purpose-built for 
adjacent-rack 25G connections where 1-metre cables fall short, including cross-rack 
leaf-to-server links, flexible cable management through overhead trays and 
under-floor pathways, and 100G breakout target deployments with extra slack. 
Compliant with SFP28 MSA, SFF-8402, and IEEE 802.3by, featuring a hot-pluggable 
SFP28 form factor, low power consumption, and a fully passive copper signal path 
with no active components. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ESP31X-20D is a 10G SFP+ LR optical transceiver delivering 10Gbps data 
transmission over single-mode fiber (SMF) up to 20km using a 1310nm DFB laser 
transmitter and PIN photodetector receiver. Supports Digital Diagnostic Monitoring 
(DDM) for real-time parameter tracking, with under 1W power consumption, LC duplex 
connector, and compliance with SFF-8431, SFF-8432, SFF-8472, and IEEE 802.3ae 
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.

The SYNOXX EDSP2X-1 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard 
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch 
stacking, and 100G breakout target deployments where short-reach passive copper 
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402, 
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption, 
and low-latency passive copper signal path with no active components required. 
Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX EDSPX-5-24 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) 
cable delivering 10Gbps — and backward-compatible 1Gbps — over a 5-metre 24AWG 
twinax connection, purpose-built for extended-rack and end-of-row 10G deployments 
where 1m and 3m cables fall short, including cross-rack ToR switch-to-server links, 
long overhead tray runs, and flexible 10G fabric connections requiring extra passive 
copper reach. Compliant with SFP+ MSA, SFF-8431, and SFF-8432 standards, with 
power consumption below 0.2W per end, hot-pluggable SFP+ form factor, and 
operating temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and 
IC Certified.

The SYNOXX ESP85X-03D is a 10G SFP+ SR optical transceiver delivering 10Gbps 
transmission over multimode fiber (MMF) up to 300m using an 850nm VCSEL transmitter 
and PIN photodetector — purpose-built for high-density, short-range data centre and 
enterprise fiber links. Supports data rates up to 10Gbps with Digital Diagnostic 
Monitoring (DDM), all-metal housing for EMI protection, and compliance with IEEE 
802.3ae and SFF-8431 standards, with power consumption under 1W. Hot-pluggable, 
RoHS compliant, and IC Certified.

The SYNOXX EDSPX-3 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) cable 
delivering 10Gb/s data transfers over a 3-metre twinax connection. Supports 10G and 
1G data rates with under 0.2W power consumption per end on standard SFP+ MSA, 
SFF-8431, and SFF-8432 compliant equipment. Hot-pluggable, RoHS compliant, and 
IC Certified for Canada and the US.