RB5009 Series

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.

The MikroTik MTP250-26V94-OD is an outdoor AC/DC power supply unit — 26V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for the MikroTik netPower outdoor switch product line and 12–30V outdoor access points and devices, pole/wall mount compatible, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Companion variant: MTP250-53V47-OD (53V 250W for higher-voltage devices such as PTZ cameras). CE, EAC, RoHS certified. No RouterOS — standalone power supply unit. USD 99.00.

The MikroTik MTP250-53V47-OD is an outdoor-rated AC/DC power supply unit designed to provide centralised 53 V power for MikroTik's netPower product line and other outdoor devices requiring higher-voltage DC power. Delivering up to 250 W at 53 V (approximately 4.7 A), it is housed in a rugged IP67-rated enclosure that provides full protection against dust ingress and immersion, making it suitable for demanding pole or wall-mount outdoor installations. It is the higher-voltage companion to the MTP250-26V94-OD (26 V / 250 W), and the appropriate choice for setups such as networks of PTZ security cameras or other outdoor equipment that requires a higher DC supply voltage. Two hose clamps are included for pole mounting. Certifications include CE, EAC, and RoHS.

The 48V2A96W is a 48V, 2A, 96W power supply designed for MikroTik devices supporting 48V PoE output, providing 30% more current than the previous 48POW model.

The 48POW is a high-capacity 48V 1.46A power adapter delivering up to 70W of power, ideal for powering advanced MikroTik networking devices.

The 24HPOW is a high-power 24V 2.5A power adapter, ideal for long cable runs and setups with multiple high-power wireless cards.

The MikroTik K-79 is a rackmount bracket kit for RB5009UG+S+IN and L009UiGS-2HaxD-IN routers — mounts up to 4× RB5009 or L009 devices side-by-side in a single standard 1U rack space. Compatible with any standard 19" rack or the MikroTik SR-10U desktop rack (40 RB5009 total in 10U). Passive mechanical bracket — no electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Includes all hardware needed for installation. USD 7.00.

The MikroTik RB5009UPr+S+OUT is the outdoor IP66 variant of MikroTik's best-selling heavy-duty PoE router — ARM64 quad-core Marvell 88F7040 at 350–1,400 MHz (auto), Marvell 88E6393 switch chip, 1 GB RAM, 1 GB NAND, RouterOS v7 License 5, 7× Gigabit Ethernet (all with 802.3af/at PoE-in and PoE-out), 1× 2.5G Ethernet (PoE-out), 1× SFP+ 10G, 1× USB 3.0 Type-A (1.5A, USB Power Reset), 9 power input options (2-pin terminal 24–57V + PoE-in on all 8 Ethernet ports), 130W total PoE-out (25W per port), passive cooling, IP66, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes K-41 fastening set, K-85 fastening set, hose clamp ×2. 

The MikroTik RB5009UPr+S+IN is a high-availability PoE-out router — quad-core ARM64 Marvell 88F7040 at 350–1400 MHz, Marvell 88E6393 switch chip, 1 GB RAM, 1 GB NAND, RouterOS v7 License 5, 7× Gigabit Ethernet (PoE-in reverse Mode B + PoE-out 802.3af/at), 1× 2.5G Ethernet (PoE-in 802.3af/at + PoE-out), 1× SFP+ (10G), USB 3.0, 3 DC inputs (DC jack + PoE-in + 2-pin terminal, all 24–57V), 130W total PoE-out budget (25W per port max), 150W max / 16W without attachments, passive cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 48V 2A adapter, IEC cord, K-55 screw kit, connector plug. USD 299.00.

The MikroTik MTP60-12V50-RS-DC is a 60W DC-DC hot-swappable power supply designed for compatible MikroTik devices including the CCR2004-16G-2S+, CRS504-4XQ-IN, and CRS510-8XS-2XQ-IN. It accepts -36V to -57V DC input and provides 12V DC output at up to 5A, making it ideal for integrating these devices into -48V DC-powered infrastructure while maintaining redundant power capability.