SYNOXX

High-performance 25G SFP28 to SFP28 direct attach copper cable designed for short-range, high-speed connectivity. Supports up to 25.78Gbps with low power consumption and excellent EMI performance.

The SYNOXX EDSP2X-1 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard 
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch 
stacking, and 100G breakout target deployments where short-reach passive copper 
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402, 
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption, 
and low-latency passive copper signal path with no active components required. 
Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX EDSPX-5-24 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) 
cable delivering 10Gbps — and backward-compatible 1Gbps — over a 5-metre 24AWG 
twinax connection, purpose-built for extended-rack and end-of-row 10G deployments 
where 1m and 3m cables fall short, including cross-rack ToR switch-to-server links, 
long overhead tray runs, and flexible 10G fabric connections requiring extra passive 
copper reach. Compliant with SFP+ MSA, SFF-8431, and SFF-8432 standards, with 
power consumption below 0.2W per end, hot-pluggable SFP+ form factor, and 
operating temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and 
IC Certified.

The SYNOXX ESP85X-03D is a 10G SFP+ SR optical transceiver delivering 10Gbps 
transmission over multimode fiber (MMF) up to 300m using an 850nm VCSEL transmitter 
and PIN photodetector — purpose-built for high-density, short-range data centre and 
enterprise fiber links. Supports data rates up to 10Gbps with Digital Diagnostic 
Monitoring (DDM), all-metal housing for EMI protection, and compliance with IEEE 
802.3ae and SFF-8431 standards, with power consumption under 1W. Hot-pluggable, 
RoHS compliant, and IC Certified.

High-speed 10G SFP+ to SFP+ direct attach copper cable for multi-gigabit data transfer, low power consumption, and reliable short-range connectivity.

The SYNOXX EDSPX-3 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) cable 
delivering 10Gb/s data transfers over a 3-metre twinax connection. Supports 10G and 
1G data rates with under 0.2W power consumption per end on standard SFP+ MSA, 
SFF-8431, and SFF-8432 compliant equipment. Hot-pluggable, RoHS compliant, and 
IC Certified for Canada and the US.

The SYNOXX EB3512-3D/EB5312-3D is a matched pair of 1.25G SFP BiDi transceivers 
that delivers Gigabit Ethernet and Fiber Channel connectivity over a single strand 
of OS2 single-mode fiber up to 3km — halving fiber count compared to duplex SFP 
modules by using wavelength-division multiplexing (WDM) with a TX1310nm/RX1550nm 
transmit-receive wavelength pair on each fiber strand. Compliant with SFP MSA and 
SFF-8472 standards, featuring LC simplex connectors, Digital Diagnostic Monitoring 
(DDM) for real-time temperature, voltage, and optical power monitoring, and a 3.3V 
operating supply. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ES-T2-R is a 1000Base-T SFP copper transceiver delivering tri-speed 
10/100/1000Mbps Ethernet connectivity over standard Cat5 twisted-pair cables up to 
100 metres — enabling 1G copper uplinks on any SFP-equipped switch or router without 
fiber or media converters. Features a hot-pluggable SFP form factor, RJ45 connector, 
SGMII interface, fully metallic low-EMI enclosure, and low power consumption of 
~1.05W, compliant with IEEE 802.3 and SFP MSA standards. Hot-pluggable, RoHS 
compliant, and IC Certified.

The SYNOXX EDSPX-1 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) cable 
delivering 10Gb/s data transfers over a 1-metre twinax connection — the ideal 
same-rack interconnect for high-density switching environments. Supports 10G and 1G 
data rates with under 0.2W power consumption per end, compliant with SFP+ MSA, 
SFF-8431, and SFF-8432 standards. Hot-pluggable, RoHS compliant, and IC Certified 
for Canada and the US.

The SYNOXX ESP3112-20D is a 1.25G SFP LX optical transceiver delivering Gigabit 
Ethernet and Fibre Channel connectivity over single-mode fiber (SMF) up to 20km 
using a 1310nm FP laser transmitter — the standard long-reach 1G fiber module for 
campus backbone links, building-to-building connections, and metro-edge deployments 
where multimode fiber falls short. Features Digital Diagnostic Monitoring (DDM) with 
real-time temperature, voltage, TX/RX power, and bias current monitoring, plus PIN 
photodiode receiver with integrated TIA and MCU control, compliant with SFP MSA and 
SFF-8472 standards. Hot-pluggable, RoHS compliant, and IC Certified.