MTP250-53V47-OD
The MikroTik MTP250-53V47-OD is an outdoor AC/DC power supply unit — 53V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for MikroTik netPower outdoor switches and devices requiring above-30V DC input, pole/wall mount compatible, 2× hose clamps included for mast mounting, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Primary use case: PTZ security camera networks and higher-voltage outdoor switch deployments. Companion variant: MTP250-26V94-OD (26V 250W for 12–30V devices). CE, EAC, RoHS certified. No RouterOS — standalone PSU. USD 99.00.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik MTP250-53V47-OD is a 250W outdoor AC/DC power supply unit at USD 99.00 — the higher-voltage companion to the MTP250-26V94-OD, delivering 53V DC output for MikroTik netPower outdoor switches and any outdoor device with a DC input voltage range above 30V, housed in the same fully sealed IP67 enclosure with pole/wall mount hardware included.
**53V 250W output — higher-voltage outdoor device compatibility**
MikroTik's own deployment example: "if you have a setup demanding higher voltage — like a net of PTZ security cameras, you could use the MTP250-53V47-OD instead." 250W output capacity powers multiple PTZ cameras or outdoor switches simultaneously from a single power supply. Always confirm the "DC jack input Voltage" range in the target device's Power Input specifications before selecting between the 26V and 53V variants — selecting the wrong voltage will damage connected equipment.
**IP67 outdoor enclosure — dust-tight, immersion rated**
IP67 is fully dust-tight and rated for temporary immersion up to 1 metre for 30 minutes — the same sealed enclosure used on the MTP250-26V94-OD. Pole/wall mount compatible with 2× hose clamps included in box — attaches directly to a standard mast or pole without additional mounting hardware.
**2× hose clamps included — mast/pole mounting ready out of box**
Unlike many outdoor PSUs that require a separate mounting kit, the MTP250-53V47-OD ships with 2× hose clamps. No additional mounting hardware purchase required for standard pole or mast installations.
**Companion variant — MTP250-26V94-OD**
For 12–30V devices (home access points, lower-voltage netPower switches): use the MTP250-26V94-OD. For above-30V devices (PTZ cameras, higher-voltage switches): use the MTP250-53V47-OD. Both are USD 99.00 — select by device voltage range only.
**Canadian market note:** CE, EAC, RoHS only — no FCC, no IC (ISED). AC/DC power supply, no wireless transmitter. Confirm CSA/cUL electrical safety certification with distributor before listing on wirelessnetware.ca — mains-connected outdoor PSU at 250W warrants electrical safety verification.
- Product code
- MTP250-53V47-OD
- Dimensions
- 240 x 46.5 x 69
- Operating Temperature
- -40°C to +70°C
- Certification
- CE, FCC, IC, IP67