List of products by brand MikroTik

The MikroTik KNOT Embedded LTE4 Global (EG25-G&KNe) is a compact industrial LTE Cat4 gateway with Bluetooth 5.4, GNSS/GPS, and Gigabit Ethernet in a DIN rail-mountable form factor. It features eSIM plus Nano SIM support with expanded global LTE band coverage including North American bands B12, B13, and B28, making it suited for IoT deployments, industrial automation, and asset tracking. Powered by RouterOS v7 and certified CE, FCC, IC, and EAC.

The MikroTik G1251-0150WNA is a 150W hot-swappable replacement power supply designed for the CRS812 DDQ. It delivers 12V DC at 12.5A and can be replaced while the switch is running, helping maintain network uptime without restarting the device. 

A pair of industrial-grade 1G/2.5G single-mode BiDi SFP modules for links up to 20 km over a single fiber strand. By transmitting and receiving on split wavelengths (1270/1330 nm), the pair halves fiber requirements while keeping stable long-distance connectivity. Built-in DDM monitors optical power, voltage, temperature, and laser bias current in real time.

The MikroTik hAP be lite is an affordable Wi-Fi 7 router and access point with RouterOS v7, dual-band wireless, 1x 2.5G Ethernet port, 3x Gigabit Ethernet ports, USB-C power, 512 MB RAM, and compact desktop design. It supports Wi-Fi 7 Multi-Link Operation and is ideal for homes, small offices, labs, and users who need advanced RouterOS features in a small and budget-friendly device.

The hAP ac² is a dual-concurrent wireless access point offering simultaneous 2.4GHz and 5GHz coverage, five Gigabit Ethernet ports, USB support, and IPsec hardware encryption in a compact, versatile design.

The MikroTik TN19-0250-55 is the official open-frame 250W replacement power supply unit for the CRS418 series rackmount switches. Rated at 55Vdc input at 4.5A, it is a direct drop-in spare for CRS418 deployments where redundant or failed PSU modules need to be replaced without taking the switch offline. MTBF is approximately 100,000 hours at 25°C.

The MikroTik MTP60-12V50-RS-DC is a 60W DC-DC hot-swappable power supply designed for compatible MikroTik devices including the CCR2004-16G-2S+, CRS504-4XQ-IN, and CRS510-8XS-2XQ-IN. It accepts -36V to -57V DC input and provides 12V DC output at up to 5A, making it ideal for integrating these devices into -48V DC-powered infrastructure while maintaining redundant power capability. 

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.

The MikroTik SolidRACK 5 mini is a compact 10-inch 5U desktop rack designed for routers, switches, power distribution equipment, and other standard 10" rack devices. It features an adjustable mounting angle, sliding mounting nuts, lightweight aluminium construction, extra cable-management space, and under-desk mounting support, making it ideal for compact network installations.