List of products by brand MikroTik

The LHG Mount is a durable, metal pole mount adapter designed for the LHG series, providing a simple, cost-effective solution for secure installations, including LHG XL models.

LMR-195 N-Type Male to N-Type Female Cable

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The RB4011 Wall Mount Kit is a secure mounting solution designed to protect your RB4011 router and its Ethernet ports in public or high-traffic areas, preventing unauthorized access and accidental disconnections.

The MikroTik rack mount ear/bracket set is designed specifically for CRS and CCR series switches, allowing for straightforward installation in a standard rack. These are the original mounting brackets included with the switches, perfect for replacement or upgrades to secure your MikroTik hardware in place

CCR3232-16XG-4DS-2DQ is a high-performance Cloud Core Router powered by Ampere CPUs, offering 200G/400G connectivity, advanced routing features, and scalable performance for modern data center and ISP networks.

The MikroTik XQ+31LC10D is a 100G QSFP28 single-mode fiber transceiver — Dual LC UPC connector, 4× independent full-duplex 25G channels, 1296/1300/1305/1309nm wavelengths (LR4-style WDM), 10km reach on single-mode fiber (OS2), built-in digital diagnostics (optical power, temperature, voltage, laser bias current). Compatible with MikroTik CCR2216, CRS504-4XQ-IN/OUT, CRS510-8XS-2XQ-IN, CRS518-16XS-2XQ-IN, and any IEEE 100GBASE-LR4 compliant QSFP28 port. MTBF ~200,000 hours at 25°C. No certifications listed (passive optical module). 

The MikroTik XS+2733LC15D is a kit of two tri-rate BiDi transceiver modules — each module supports 1.25G SFP, 10G SFP+, and 25G SFP28 data rates with DDM support, operating as a matched pair over a single LC UPC single-mode optical cable at distances up to 15 km. Wavelengths 1270nm and 1330nm (one per module in the pair) — BiDi operation eliminates the need for duplex fibre, requiring only a single strand between two endpoints. Single LC UPC connector per module. Compatible with any SFP, SFP+, or SFP28 cage supporting 1G, 10G, or 25G operation. No RouterOS — passive optical transceivers. USD 349.00.

The MikroTik Chateau LTE18 ax is the Generation 6 flagship home and office LTE router — CAT18 LTE delivering up to 1.2 Gbps downlink with 4×4 MIMO, dual-band Wi-Fi 6 (574 Mbps at 2.4 GHz, 1,200 Mbps at 5 GHz), four Gigabit Ethernet ports plus a 2.5 Gigabit Ethernet port, 4 built-in LTE antennas with 2 optional external antenna ports, quad-core ARM64 IPQ-6010 at 1.8 GHz, 1 GB RAM, WPA3, USB-A, RouterOS v7 License 4, -40°C to +65°C. Single DC jack input (12–28V), passive cooling, 19W max, 240 × 156 × 44 mm. Includes 24V 1.2A adapter and 1.5m UTP flat cable. The complete LTE home router for households and small offices replacing fixed broadband with a single, elegant device.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.