List of products by brand MikroTik

Wireless Wire Dish: Achieve 2 Gbps aggregate speeds over a distance of up to 1.5 km! A revolutionary 60 GHz wireless solution offering fiber-like quality and stability at a fraction of the cost.

The MikroTik LHG LTE18 kit is a CAT18 LTE outdoor router with a built-in 17 dBi high-gain grid antenna — delivering download speeds up to 1.2 Gbps and uploads up to 150 Mbps via carrier aggregation, from locations where standard routers and phones have no usable signal. Powered by 802.3af/at PoE-in (12–57V), running RouterOS v7 on a dual-core 64-bit ARM CPU at 800 MHz with 256 MB RAM, IP54-rated, and rated from -40°C to +70°C. Includes Gigabit PoE injector, 24V adapter, hose clamps, and screw kit. The correct last-mile LTE solution for remote sites, rural properties, and any location where cable or fibre infrastructure is absent.

The MikroTik ATL LTE18 kit is a high-performance outdoor LTE Category 18 router designed for demanding mobile broadband deployments where signal strength, stability, and throughput are critical. Built around a 64-bit ARM processor and powered by a Cat18 modem capable of up to 1.2 Gbps downlink and 150 Mbps uplink, it features 4×4 MIMO on the downlink with a suite of six integrated high-gain antennas — four covering the middle band (1.7–2.7 GHz) and two covering the low band (700 MHz–1 GHz, including LTE Band 28). Its distinctive aerodynamic enclosure is IP54-rated for outdoor use and engineered to shed snow and water in harsh weather. The unit is powered via a single 802.3af/at PoE input, ships with RouterOS v7.

The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.

The MikroTik cAP LTE12 ax is a CAT12 LTE + dual-band Wi-Fi 6 ceiling access point delivering up to 600 Mbps LTE downlink and 150 Mbps uplink — paired with 574 Mbps at 2.4 GHz and 1,200 Mbps at 5 GHz via 802.11ax, on a quad-core ARM64 IPQ-6010 CPU at 1.8 GHz with 1 GB RAM. 802.3af/at PoE-in and passive PoE-out on Ether2 (22.8W), IP20, WPA3/OWE security, CAPsMAN-ready, RouterOS v7 License 4, -40°C to +50°C. Ceiling-mount design eliminates theft, obstruction, and cable clutter from the workspace. Includes 48V adapter, Gigabit PoE injector, K-81 fastening set, and cAP ax ceiling bracket. The correct single-device LTE + Wi-Fi 6 solution for pop-up businesses, food stands, festival operations, and high-traffic temporary venues.

The MikroTik KNOT LR8G kit is an industrial-grade multi-radio IoT gateway combining LoRa® (868 MHz), LTE CAT-M1/NB-IoT, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi (802.11b/g/n), RS485/Modbus, and dual 100 Mbps Ethernet with PoE-in and PoE-out — running full RouterOS v7 on a compact 122 × 87 × 26 mm platform at 6W idle consumption. Three power input options (DC jack 12–57V, 802.3af/at PoE-in, or 5V MicroUSB), DIN rail and wall mount hardware included, -40°C to +70°C operating range, 200,000-hour MTBF. **Canadian buyers: this is the 868 MHz LoRa® version — confirm LoRa® frequency band and LTE CAT-M1 band compatibility with Canadian carriers before ordering.**

The MikroTik G1070 is a 500W open-frame replacement power supply unit for the MikroTik CRS328-24P-4S+RM switch — delivering dual-rail DC output at 53Vdc 8.8A and 26.5Vdc 17.6A from a universal 90–264Vac input, -10°C to +55°C tested ambient temperature, ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS328-24P-4S+RM deployment where power supply failure must not result in switch downtime or an emergency parts sourcing event.

The MikroTik KNOT LR8G kit (RB924iR-2nD-BT5&BG770A&R11e-LR8G) is a compact, industrial-grade IoT gateway designed to bridge LoRa®-based sensor networks with cloud and enterprise infrastructure. Combining a 915 MHz LoRa® radio, LTE CAT-M1 and NB2 cellular connectivity, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi, RS485/Modbus, GPIO, and two 100 Mbps Ethernet ports with PoE-in and PoE-out — all in a passively cooled enclosure with DIN rail and wall mount support — the KNOT LR8G is purpose-built for smart asset tracking, cold chain monitoring, agricultural sensing, and industrial automation deployments. Running RouterOS v7, it offers full scripting and automation capabilities for any IoT scenario.

The MikroTik Chateau LTE12 (2025) (D53G-5HacD2HnD-TC&EG120K-EA) is the 2025 refresh of MikroTik's most accessible LTE home and office router — now with a new Quectel EG120K modem delivering expanded 4×4 MIMO across more LTE bands (B1/3/7/38/40/41), full Band 28 (700 MHz) support for rural low-band coverage, LTE Cat 12 at 600 Mbps downlink, dual-band Wi-Fi (300 Mbps on 2.4 GHz Wi-Fi 4 + 867 Mbps on 5 GHz Wi-Fi 5), 5× Gigabit Ethernet, SMA female connectors for external LTE antennas, 1× Micro SIM slot, USB Type-A with USB Power Reset, and RouterOS v7 License Level 4. The right Chateau for households and small businesses that need solid LTE internet and full RouterOS control, without paying for 5G they cannot use yet.

The QRT 5 is a rugged outdoor flat-panel antenna with an integrated high-power 5GHz dual-chain wireless transmitter. Featuring a 24dBi antenna and a Gigabit Ethernet port, it is perfect for point-to-point links requiring reliable and high-speed connectivity.