Hardware

The MikroTik KNOT LR9G Kit (RB924iR-2nD-BT5&BG770A&R11e-LR9G) is a compact, affordable industrial IoT gateway built for asset tracking, remote monitoring, and automation. It combines LoRa® 915 MHz with enhanced reception, concurrent GPS and LTE CAT-M1/NB2, Bluetooth 5.2, 2.4 GHz Wi-Fi 4, RS485/Modbus, 2× 100 Mbps Ethernet with PoE-in and PoE-out, GPIO, DIN rail mounting, and RouterOS v7 — all in a passively cooled 6W form factor. Purpose-built for hospitals, cold chain, agriculture, and industrial automation where low-cost, long-range IoT connectivity is essential.

The MikroTik NetMetal ax is a heavy-duty outdoor Wi-Fi 6 access point — AX3000 dual-band 802.11ax, 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, integrated 4 dBi dipole antennas) and 5 GHz (2,400 Mbps, QCN-6102, integrated 4 dBi dipole antennas), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, RouterOS v7 License 4, 2× Gigabit Ethernet with 802.3af/at PoE-in on Ether1, DC jack (12–57V), USB 2.0 Type-A, metal die-cast enclosure, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, EAC, RoHS certified. Includes N-type female external antenna connectors for both bands.

wAP LR9 kit is an out-of-the-box gateway solution for LoRa® technology, operating in the 902-928 MHz frequency range. It includes a weatherproof access point with a 2.4 GHz WLAN interface and an Ethernet port, pre-configured for seamless connectivity to public or private LoRa® servers.

The MikroTik wAP LR9G kit (RBwAPR-2nD&R11e-LR9G) is a rugged, out-of-the-box LoRa 915 MHz IoT gateway combining LoRa wireless, built-in GPS, and 2.4 GHz Wi-Fi 4 in MikroTik's proven weatherproof wAP enclosure. With Rx sensitivity down to -141 dBm, three power input options (PoE, automotive, and DC jack), SMA female connectors for external antennas, and a preinstalled UDP packet forwarder compatible with The Things Network and The Things Industries, it is a complete deploy-and-go LoRa gateway for smart agriculture, perimeter monitoring, asset tracking, industrial IoT, and any outdoor sensor deployment.

The MikroTik G1382-0350WNA is an optional -48V DC hot-swappable power supply for the CRS804 DDQ switch. It enables the switch to draw power directly from standard -48V DC telecom infrastructure, adding flexible power input options alongside the default AC module. It can be installed or replaced while the device is running, providing additional redundancy and operational flexibility for carrier-grade, remote site, and DC-powered deployments.

The MikroTik DPS-550AB-36G is the official 550W hot-swap replacement power supply unit for the MikroTik ROSE Data Server (RDS2216). Engineered to match the RDS2216's energy-efficient, low heat-output architecture, it can be installed and replaced live — no shutdown, no service interruption, no data loss. At 12V / 550W output, the DPS-550AB-36G is the correct spare PSU to keep on-site for any ROSE Data Server deployment where uptime is a requirement.

The MikroTik hAP ac (RB962UiGS-5HacT2HnT) is a dual-band dual-concurrent Wi-Fi 4/5 desktop router — QCA9558 single-core MIPSBE at 720 MHz, 128 MB RAM, 16 MB flash, RouterOS v7 License 4, 2.4 GHz Wi-Fi 4 3×3 MIMO 450 Mbps (2.5 dBi) + 5 GHz Wi-Fi 5 AC1750 3×3 MIMO 1300 Mbps (2 dBi), 5× GbE, 1× SFP, 1× USB Type-A (3G/4G modem or storage), passive PoE-out on Ether5 (700 mA low / 350 mA high), dual power input (DC jack 11–57V + passive PoE-in 11–57V), 17W max, beeper, PCB temperature + voltage monitors, passive cooling, IP20, 114 × 137 × 29 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 24V 1.2A power adapter. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik G1394-0350WNA is a 12VDC 27.5A 350W hot-swappable replacement power supply designed exclusively for the CRS804 DDQ switch. It allows a failed or degraded power module to be replaced without shutting down the switch, restoring full power redundancy instantly. Built for data centres, enterprise racks, and labs where uninterrupted operation is non-negotiable.

The MikroTik LHG XL 5 ax (LHG-5axD-XL) is the high-gain long-range outdoor Wi-Fi 6 CPE built for point-to-point links that demand maximum reach and signal stability. With a 27 dBi integrated grid antenna, 5 GHz 802.11a/n/ac/ax at 1,200 Mbps, WPA3 security, dual-core IPQ-5010 ARM CPU, 256 MB RAM, passive PoE powering (12–28V), IP54 weatherproofing, FCC and IC certification, and RouterOS v7 — it is capable of stable PtP links up to 30 km in ideal conditions. The XL model is the right choice when the standard LHG 5 ax (24.5 dBi) is not enough.

The Metal 52 ac is a rugged, high-power dual-band wireless device supporting 802.11ac with software-selectable 2.4GHz or 5GHz operation. Equipped with a Gigabit Ethernet port and an included Omni antenna, it is perfect for AP, backbone, or CPE applications.