Value-Added Master Distributor, MikroTik Canada

Hardware

MikroTik Routers and Wireless.

MikroTik provides routing and wireless equipments for all possible uses from the customer location, up to high end data centres.

Contact us for back-order
MikroTik Chateau LTE18 ax CAT18 Wi-Fi 6 Home LTE Router
Contact us for back-order
The MikroTik Chateau LTE18 ax is the Generation 6 flagship home and office LTE router — CAT18 LTE delivering up to 1.2 Gbps downlink with 4×4 MIMO, dual-band Wi-Fi 6 (574 Mbps at 2.4 GHz, 1,200 Mbps at 5 GHz), four Gigabit Ethernet ports plus a 2.5 Gigabit Ethernet port, 4 built-in LTE antennas with 2 optional external antenna ports, quad-core ARM64 IPQ-6010 at 1.8 GHz, 1 GB RAM, WPA3, USB-A, RouterOS v7 License 4, -40°C to +65°C. Single DC jack input (12–28V), passive cooling, 19W max, 240 × 156 × 44 mm. Includes 24V 1.2A adapter and 1.5m UTP flat cable. USD 299.00. The complete LTE home router for households and small offices replacing fixed broadband with a single, elegant device.
Contact us for back-order
MikroTik Wireless Wire nRAY 60GHz PtP 1500m Kit
Contact us for back-order
The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.
Contact us for back-order
MikroTik LHG LTE18 Kit CAT18 Last-Mile LTE Router 17 dBi
Contact us for back-order
The MikroTik LHG LTE18 kit is a CAT18 LTE outdoor router with a built-in 17 dBi high-gain grid antenna — delivering download speeds up to 1.2 Gbps and uploads up to 150 Mbps via carrier aggregation, from locations where standard routers and phones have no usable signal. Powered by 802.3af/at PoE-in (12–57V), running RouterOS v7 on a dual-core 64-bit ARM CPU at 800 MHz with 256 MB RAM, IP54-rated, and rated from -40°C to +70°C. Includes Gigabit PoE injector, 24V adapter, hose clamps, and screw kit. USD 279.00. The correct last-mile LTE solution for remote sites, rural properties, and any location where cable or fibre infrastructure is absent.
Contact us for back-order
MikroTik ATL LTE18 Kit Cat18 4×4 MIMO Outdoor Router
Contact us for back-order
The MikroTik ATL LTE18 kit (ATLGM&EG18-EA) is a directional outdoor LTE Cat18 router — dual-core ARM64 Marvell 88F3720 at 800 MHz, 256 MB RAM, 16 MB FLASH, RouterOS v7 License 3, LTE Cat18 1.2 Gbps DL / 150 Mbps UL, 4×4 MIMO DL / 1×1 UL, FDD bands 1/3/5/7/8/20/28 + TDD bands 38/40/41, 3G R8, 1× Micro SIM, 1× M.2 slot, 4× high-gain mid-band antennas (1.7–2.7 GHz) + 2× high-gain low-band antennas (700MHz–1GHz, Band 28), 1× Gigabit Ethernet PoE-in 802.3af/at 12–57V, passive cooling, IP54, -40°C to +70°C, MTBF ~200,000 hours. CE, EAC, RoHS — no FCC, no IC. Includes 24V 0.8A adapter, Gigabit PoE injector, hose clamp ×2. USD 279.00.
Contact us for back-order
MikroTik G1270 750W Replacement PSU CRS354-48P-4S+2Q+RM
Contact us for back-order
The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. USD 259.00. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.
Contact us for back-order
MikroTik cAP LTE12 ax CAT12 Wi-Fi 6 Ceiling AP LTE
Contact us for back-order
The MikroTik cAP LTE12 ax is a CAT12 LTE + dual-band Wi-Fi 6 ceiling access point delivering up to 600 Mbps LTE downlink and 150 Mbps uplink — paired with 574 Mbps at 2.4 GHz and 1,200 Mbps at 5 GHz via 802.11ax, on a quad-core ARM64 IPQ-6010 CPU at 1.8 GHz with 1 GB RAM. 802.3af/at PoE-in and passive PoE-out on Ether2 (22.8W), IP20, WPA3/OWE security, CAPsMAN-ready, RouterOS v7 License 4, -40°C to +50°C. Ceiling-mount design eliminates theft, obstruction, and cable clutter from the workspace. Includes 48V adapter, Gigabit PoE injector, K-81 fastening set, and cAP ax ceiling bracket. USD 229.00. The correct single-device LTE + Wi-Fi 6 solution for pop-up businesses, food stands, festival operations, and high-traffic temporary venues.
Contact us for back-order
MikroTik KNOT LR8G IoT Gateway LoRa® LTE GPS RouterOS
Contact us for back-order
The MikroTik KNOT LR8G kit is an industrial-grade multi-radio IoT gateway combining LoRa® (868 MHz), LTE CAT-M1/NB-IoT, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi (802.11b/g/n), RS485/Modbus, and dual 100 Mbps Ethernet with PoE-in and PoE-out — running full RouterOS v7 on a compact 122 × 87 × 26 mm platform at 6W idle consumption. Three power input options (DC jack 12–57V, 802.3af/at PoE-in, or 5V MicroUSB), DIN rail and wall mount hardware included, -40°C to +70°C operating range, 200,000-hour MTBF. USD 179.00. **Canadian buyers: this is the 868 MHz LoRa® version — confirm LoRa® frequency band and LTE CAT-M1 band compatibility with Canadian carriers before ordering.**
Contact us for back-order
G1070MikroTik G1070 500W Replacement PSU CRS328-24P-4S+RM
Contact us for back-order
The MikroTik G1070 is a 500W open-frame replacement power supply unit for the MikroTik CRS328-24P-4S+RM switch — delivering dual-rail DC output at 53Vdc 8.8A and 26.5Vdc 17.6A from a universal 90–264Vac input, -10°C to +55°C tested ambient temperature, ~200,000-hour MTBF at 25°C. USD 199.00. The correct replacement PSU to stock alongside any CRS328-24P-4S+RM deployment where power supply failure must not result in switch downtime or an emergency parts sourcing event.
Contact us for back-order
MikroTik KNOT LR8G Kit LoRa 868MHz LTE IoT Gateway
Contact us for back-order
The MikroTik KNOT LR8G kit (RB924iR-2nD-BT5&BG770A&R11e-LR8G) is a new-generation industrial IoT gateway that packs LoRa 868 MHz, concurrent LTE CAT-M1/NB2 and GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi 4, RS485/Modbus, GPIO, and 2× Fast Ethernet with PoE-in and PoE-out into a compact DIN rail and wall-mountable enclosure. Designed for asset tracking, cold chain monitoring, remote automation, and agricultural sensor networks, it delivers enterprise-grade IoT connectivity at a price accessible for large-scale deployments — USD 179, with RouterOS v7 License Level 4 and free lifetime software updates.