Switches

The MikroTik CRS310-1G-5S-4S+IN is a 1U rack-mount fibre switch — Marvell 98DX226S dual-core ARM 32bit switch chip at 800 MHz (CPU + switch ASIC combined), 256 MB RAM, 16 MB FLASH, RouterOS v7 / SwitchOS dual boot, License 5, 5× SFP (1G), 4× SFP+ (10G), 1× GbE (direct switch chip connection), RJ45 serial console, 2× DC inputs (DC jack 18–57V + 802.3af/at PoE-in 18–57V), 1 fan, 20W max / 8W without attachments, CPU + PCB + voltage monitors, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-48 fastening set, rack ears, 24V 1.2A adapter. USD 199.00.

The MikroTik CRS326-24G-2S+IN is a compact fanless 26-port dual-boot managed switch — 98DX3236 dual-core ARM 32-bit at 800 MHz, 512 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 24× GbE + 2× SFP+ (1.25G SFP and 10G SFP+ supported), 1× RJ45 serial console, dual power input (DC jack 10–30V + passive PoE-in 10–30V), 21W max, passive cooling, IP20, 285 × 144 × 44 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Desktop enclosure — rackmount equivalent is the CRS326-24G-2S+RM. Includes 24V 1.2A power adapter. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik CSS326-24G-2S+RM is a 1U rackmount smart switch with 24 Gigabit Ethernet ports and 2 SFP+ ports, powered by SwOS for versatile network management.

The MikroTik CRS305-1G-4S+IN is a compact, silent desktop switch with 1 Gigabit Ethernet port, 4 SFP+ 10Gbps ports, dual boot OS, and power redundancy.

The MikroTik GPERx6 (CSS606-1G-2Gi-3S+OUT) is a rugged, IP66-rated outdoor switch designed to simplify long-distance deployments by combining high-speed fibre, PoE, and DC power output in a single compact unit. Featuring three 10G SFP+ ports, three Gigabit Ethernet ports (with PoE-in and PoE-out), three DC outputs, and a dedicated 10G switch chip, it is purpose-built for use with hybrid fibre and copper cables — enabling power and data to be delivered over distances of 1–2 km to remote cameras, access points, and IoT devices. Passively cooled and rated for -40°C to 70°C operation, the GPERx6 runs SwOS and is ideal for perimeter surveillance, CCTV towers, industrial IoT, and solar-powered edge deployments.

The MikroTik CSS318-16G-2S+IN is a compact, passively cooled managed switch featuring 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, running MikroTik's lightweight SwOS operating system. Housed in a 10-inch form factor chassis that also fits 19-inch racks, it is ideal for deployments where 24 ports are too many and 8 ports simply are not enough. With browser-based configuration, broad SwOS feature support, and very low power consumption, it offers a practical and scalable solution for small to medium network environments.

The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.

The MikroTik CSS610-8G-2S+IN is a compact 10-port Layer 2 managed switch — 88E6393X switch chip, 8× GbE + 2× SFP+ 10G, 20 Gbps full-duplex switching capacity, SwOS web management interface, 1× RJ45 serial console, passive cooling, desktop or rackmount (1U with SFP+ ports facing rear), DC jack (24–57V) or 802.3af/at PoE-in on Ether1, 7.5W max without attachments, 175 × 110 × 28 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Non-PoE variant of the CSS610-8P-2S+IN. Includes 24V 1A power adapter and K-55 screw set. USD 99.00.

The MikroTik RB260GSP is a compact SOHO smart switch offering five Gigabit Ethernet ports, one SFP cage, and passive PoE output on four of its five Ethernet ports — all in a lightweight desktop plastic enclosure. Powered by the QCA8337 switch chip and running MikroTik's dedicated SwOS (SwitchOS) operating system, it delivers straightforward yet flexible Layer 2 switching management through a clean web interface. Ports 2–5 pass through passive PoE at the same voltage applied to the unit, making it simple to power compatible wireless access points, IP cameras, or small routers without the need for separate PoE injectors. 

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.