Accessories

The K-65 rackmount ears are designed specifically for the RB4011 series, enabling seamless installation of units in standard rack setups.

The RBPOE is a cost-effective passive PoE injector designed for powering 10/100Mbps RouterBOARD devices. It simplifies installations by reducing the number of cables required.

The MikroTik G1382-0350WNA is an optional -48V DC hot-swappable power supply for the CRS804 DDQ switch. It enables the switch to draw power directly from standard -48V DC telecom infrastructure, adding flexible power input options alongside the default AC module. It can be installed or replaced while the device is running, providing additional redundancy and operational flexibility for carrier-grade, remote site, and DC-powered deployments.

The MikroTik DPS-550AB-36G is the official 550W hot-swap replacement power supply unit for the MikroTik ROSE Data Server (RDS2216). Engineered to match the RDS2216's energy-efficient, low heat-output architecture, it can be installed and replaced live — no shutdown, no service interruption, no data loss. At 12V / 550W output, the DPS-550AB-36G is the correct spare PSU to keep on-site for any ROSE Data Server deployment where uptime is a requirement.

The MikroTik G1394-0350WNA is a 12VDC 27.5A 350W hot-swappable replacement power supply designed exclusively for the CRS804 DDQ switch. It allows a failed or degraded power module to be replaced without shutting down the switch, restoring full power redundancy instantly. Built for data centres, enterprise racks, and labs where uninterrupted operation is non-negotiable.

The MikroTik FTC21-ups is a weatherproof IP67 fiber-to-copper media converter with a 2.5G SFP port, 2× Gigabit Ethernet, and built-in Li-Ion UPS batteries. The integrated battery keeps network links stable during short power outages and brownouts — preventing unnecessary device renegotiations and reboots. Running SwOS Lite with VLAN, SNMP, and ACL support, it also delivers PoE-out on Ether2 (802.3af/at) making it well suited for outdoor CCTV and edge deployments.

The MikroTik G1251-0250WNA is the official 250W hot-swap replacement power supply unit for the CRS812 DDQ 400G aggregation switch. Rated at 12Vdc, 20.8A output, it is a direct drop-in spare that can be replaced on the go — no switch restart, no downtime, no service disruption. It is the correct on-site spare for any production CRS812 DDQ deployment where power supply redundancy and zero-downtime replacement are operational requirements.

The MikroTik TN19-0250-55 is the official open-frame 250W replacement power supply unit for the CRS418 series rackmount switches. Rated at 55Vdc input at 4.5A, it is a direct drop-in spare for CRS418 deployments where redundant or failed PSU modules need to be replaced without taking the switch offline. MTBF is approximately 100,000 hours at 25°C.

The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.

Universal rack rails for larger MikroTik devices and deep server cabinets from 23” to 40”. The 23–40 Rack Rail R0 provides stable rear support for heavy or large-format devices where standard rack ears are not enough. It is ideal for products like RDS2216, CCR2216, CRS520, CRS354-48P, CRS812, CRS804, and future MikroTik rackmount devices.