List of products by brand MikroTik

The MikroTik netPower 16P (CRS318-16P-2S+OUT) is a compact outdoor 18-port dual-boot PoE switch — 98DX226S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 16× GbE 802.3af/at PoE-out (Ether1–16) + 2× SFP+ 10G, 36 Gbps non-blocking throughput, 72 Gbps switching capacity, 53.6 Mpps forwarding rate, dual DC jack input (18–30V or 48–57V), 316W max / 16W without attachments, no onboard voltage converter, passive cooling, IP54, 303 × 212 × 78 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, 2× DC to terminal block adapters. Power supply NOT included.

The MikroTik CRS309-1G-8S+IN is a compact desktop switch with 8x 10G SFP+ ports, 1 Gigabit Ethernet port, dual boot OS, and advanced network performance.

The MikroTik Cloud Hosted Router (CHR) P-Unlimited License provides a powerful, feature-rich solution for optimizing and securing modern cloud networks. Advanced QoS, high-speed connectivity, and robust security ensure reliable and efficient performance for diverse networking needs.

The MikroTik netFiber 9 is a powerful IP54-rated outdoor fibre switch combining 1 Gigabit Ethernet port, 5 SFP ports, and 4 SFP+ 10G ports in a passively cooled, weatherproof enclosure. Supporting both RouterOS v7 and SwitchOS (dual boot), it is capable of light routing tasks in addition to switching, making it a versatile solution for building outdoor optical 10G networks — particularly suited for connections exceeding 100 metres where maintaining data rates is essential. It ships as a complete kit with a PoE injector, power adapter, and mounting hardware.

The MikroTik FiberBox Plus is a compact, ruggedised outdoor fibre switch designed for high-mast, pole, and tower deployments where reliable 10-Gigabit connectivity is needed in the field. Built around the Marvell 98DX226S switch chip with a 32-bit ARM CPU running at 800 MHz and 256 MB of RAM, it features one Gigabit Ethernet port and four 10G SFP+ ports, giving it a significant throughput advantage over its predecessor. It runs both RouterOS v7 and SwOS, offering flexibility between full-featured routing and streamlined switch management. Three power input options — 802.3af/at PoE-in, a DC jack, and a 2-pin terminal — make it easy to integrate into existing outdoor deployments. With an IP66 water-resistance rating providing protection against powerful water jets from any direction.

The MikroTik CSS610-8P-2S+IN is a compact managed PoE switch — Marvell 88E6193X switch ASIC, 64 KB FLASH, SwitchOS Lite, 8× Gigabit Ethernet with 802.3af/at + passive PoE-out (140W total budget, 1000 mA low-voltage / 625 mA high-voltage per port), 2× SFP+ (10G), AC input 100–240V + DC jack 48–57V, 162W max / 12W without attachments, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K-48 fastening set, IEC cord. USD 229.00. Browser-configurable managed PoE switch for home, SMB, hotel, call centre, and IP camera deployments.

The MikroTik XQ+31LC02D is a 100 Gigabit QSFP28 optical transceiver module designed for single-mode fibre links of up to 2 kilometres. It uses the CWDM4 (Coarse Wavelength Division Multiplexing) architecture, transmitting across four separate wavelengths — 1271 nm, 1291 nm, 1311 nm, and 1331 nm — over a standard Dual LC UPC connector, making it compatible with widely available OS2 single-mode fibre patch cables. The XQ+31LC02D is well suited for inter-building, campus, or data centre interconnects where DAC cables or short-reach multimode optics cannot cover the required distance, and is compatible with MikroTik's QSFP28-equipped core switches and routers including the CCR2216, CRS504, CRS518, CRS510, and CRS520.

The MikroTik Wireless Wire (RBwAPG-60adkit) is a complete point-to-point wireless kit that replaces a Gigabit Ethernet cable with a 60 GHz radio link — delivering 1 Gbps full duplex throughput for distances of up to 200 metres. The kit includes two wAP 60G devices that are pre-paired at the factory, so installation is as simple as pointing the two units at each other and powering them on. The 60 GHz link operates outside the congested 2.4 GHz and 5 GHz Wi-Fi spectrum, providing a stable, interference-free connection secured with AES encryption. Each unit runs RouterOS Level 3 on a quad-core ARM processor, is PoE-powered, rated IP55, and rated for outdoor operation from -40°C to +70°C. 

The MikroTik CRS310-8G+2S+IN is a compact 2.5 Gigabit desktop/rackmount switch — 8× 2.5G Ethernet ports, 2× SFP+ ports (multi-rate: 1G / 2.5G / 10G), Marvell 98DX226S switch ASIC with integrated dual-core ARM32 CPU at 800 MHz, 256 MB RAM, 32 MB FLASH, RouterOS v7 License 5 / SwitchOS (dual-boot), 1× USB 2.0 Type-A (1A, USB Power Reset), DC jack 18–57V input, single fan active cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.5A power adapter, K-48 fastening set, rackmount ears. 

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.