List of products by brand MikroTik

The MikroTik CSS610-8P-2S+IN is a compact managed PoE switch — Marvell 88E6193X switch ASIC, 64 KB FLASH, SwitchOS Lite, 8× Gigabit Ethernet with 802.3af/at + passive PoE-out (140W total budget, 1000 mA low-voltage / 625 mA high-voltage per port), 2× SFP+ (10G), AC input 100–240V + DC jack 48–57V, 162W max / 12W without attachments, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K-48 fastening set, IEC cord. USD 229.00. Browser-configurable managed PoE switch for home, SMB, hotel, call centre, and IP camera deployments.

The MikroTik XQ+31LC02D is a 100 Gigabit QSFP28 optical transceiver module designed for single-mode fibre links of up to 2 kilometres. It uses the CWDM4 (Coarse Wavelength Division Multiplexing) architecture, transmitting across four separate wavelengths — 1271 nm, 1291 nm, 1311 nm, and 1331 nm — over a standard Dual LC UPC connector, making it compatible with widely available OS2 single-mode fibre patch cables. The XQ+31LC02D is well suited for inter-building, campus, or data centre interconnects where DAC cables or short-reach multimode optics cannot cover the required distance, and is compatible with MikroTik's QSFP28-equipped core switches and routers including the CCR2216, CRS504, CRS518, CRS510, and CRS520.

The MikroTik Wireless Wire (RBwAPG-60adkit) is a complete point-to-point wireless kit that replaces a Gigabit Ethernet cable with a 60 GHz radio link — delivering 1 Gbps full duplex throughput for distances of up to 200 metres. The kit includes two wAP 60G devices that are pre-paired at the factory, so installation is as simple as pointing the two units at each other and powering them on. The 60 GHz link operates outside the congested 2.4 GHz and 5 GHz Wi-Fi spectrum, providing a stable, interference-free connection secured with AES encryption. Each unit runs RouterOS Level 3 on a quad-core ARM processor, is PoE-powered, rated IP55, and rated for outdoor operation from -40°C to +70°C. 

The MikroTik CRS310-8G+2S+IN is a compact 2.5 Gigabit desktop/rackmount switch — 8× 2.5G Ethernet ports, 2× SFP+ ports (multi-rate: 1G / 2.5G / 10G), Marvell 98DX226S switch ASIC with integrated dual-core ARM32 CPU at 800 MHz, 256 MB RAM, 32 MB FLASH, RouterOS v7 License 5 / SwitchOS (dual-boot), 1× USB 2.0 Type-A (1A, USB Power Reset), DC jack 18–57V input, single fan active cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.5A power adapter, K-48 fastening set, rackmount ears. 

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.

The MikroTik CRS326-24G-2S+RM is a 24-port Gigabit switch with 2x SFP+ cages, dual boot OS (RouterOS/SwOS), and advanced management features in a 1U rackmount case.

The MikroTik CRS112-8P-4S-IN is an 8-port Gigabit PoE switch with 4 SFP cages, multiple PoE output options, and RouterOS L5 for advanced network management.

The MikroTik netPower Lite 8P (CSS610-8P-2S+OUT) is a compact, low-cost outdoor PoE switch with an integrated UPS and smart battery charger — keeping CCTV cameras, access points, and wireless backhaul online even when the grid goes dark. It features 8× Gigabit Ethernet PoE-out (802.3af/at), 2× 10G SFP+ uplinks, 120W total PoE budget, 24–57V DC input, IP54 weatherproofing, and SwOS Lite — built for WISPs, CCTV deployments, apartment buildings, utilities, and smart-city installations.

The MikroTik Chateau PRO ax is MikroTik's highest-performance home and office Wi-Fi 6 router — AX3600 dual-band Wi-Fi 6 with 4×4 MIMO on both 2.4 GHz (1,148 Mbps, QCN-5024, 5 dBi) and 5 GHz (2,400 Mbps, QCN-5054, 6 dBi), quad-core ARM64 IPQ-8072A at 2.2 GHz, 1 GB RAM, 5× Gigabit Ethernet ports, passive PoE-out on Ether5 (up to 22.8W), USB 3.0 type-A (1.5A), RouterOS v7 License 6, DC jack 18–57V, 55W max, passive cooling, -40°C to +70°C, MTBF ~200,000 hours. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 48V 1.35A power adapter.

The MikroTik CRS304-4XG-IN is a compact 4-port 10 Gigabit Ethernet desktop switch and router — 4× RJ45 10GbE copper ports (no SFP, no SFP+), Marvell Prestera 98DX3236 switch chip, quad-core ARM64 AL21400 at 1,400 MHz, 1 GB RAM, 1 GB NAND, dual-boot SwOS and RouterOS v7 License 6, USB 3.0 Type-A, DC jack (18–28V), passive cooling, IP20, -20°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.2A power adapter. The correct compact 10GbE desktop switch for homelab operators, small server rooms, and 10G-ready workstation deployments where RJ45 copper 10GbE connectivity is required without SFP+ cabling, transceivers, or rack infrastructure.