Hardware

The MikroTik R11e-LR2 is a 2.4 GHz LoRa Concentrator Gateway card in mini PCIe form factor — installs in any MikroTik device with a mini PCIe slot and connected USB lines, 4 RX channels + 1 TX channel, Chirp Spread Spectrum modulation (no interference with 2.4 GHz WLAN), designed for high-density industrial IoT sensor deployments, 2W max power consumption, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. CE, FCC, IC, RoHS certified. Compatible with RouterBOARD and other MikroTik mini PCIe hosts. USD 69.00.

The RB951Ui-2HnD is a high-performance 2.4GHz wireless SOHO access point featuring a 600MHz CPU, five Ethernet ports, USB connectivity, and PoE output on port 5.

The MikroTik FTC21 is a weatherproof IP55 Fiber-to-Copper media converter with smart management capabilities powered by SwOS Lite. It bridges a single SFP/SFP+ fiber port (with 2.5G support) to a Gigabit Ethernet copper port, and goes beyond simple media conversion by offering interface monitoring, VLAN support, SNMP reporting, basic traffic shaping, and advanced Access Control Lists. Housed in a passively cooled, outdoor-rated enclosure, it is suitable for both indoor and harsh outdoor deployments. The kit includes a PoE injector, 48V power adapter, and mounting hardware.

The MikroTik CRS106-1C-5S is a compact smart switch with 5x SFP cages, 1x combo SFP/Gigabit port, RouterOS L5, and desktop case. Ideal for SFP device connections.

The MikroTik Groove 52 is MikroTik's smallest outdoor RouterBOARD — a dual-band 2.4/5 GHz Wi-Fi 4 CPE and backbone unit in a 180 × 49 × 44 mm, 193 g weatherproof enclosure with a built-in N-male connector, software-selectable band switching, Nv2 TDMA support (up to 125 Mbps aggregate), passive PoE-in (9–30V), passive cooling, -40°C to +70°C, and RouterOS v7 on License 3. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes PoE injector, 24V 0.38A power adapter, and metal mounting ring. The correct low-cost outdoor CPE for point-to-point backbone links, last-mile subscriber delivery, and antenna-direct N-male deployments on a tight budget.

RB911G-5HPnD: A compact and powerful 5 GHz wireless router with a 600 MHz CPU, 32 MB RAM, Gigabit Ethernet, and integrated high-power wireless capabilities. Preloaded with RouterOS L3, it’s an ideal solution for small-scale networking with robust performance.

The cAP is a ceiling-mounted, dual-chain 2.4GHz access point designed for seamless integration into environments like hotels, airports, and malls. It supports 802.3at/af PoE and centralized management via MikroTik CAPsMAN.

The MikroTik TOF-2400-8V-4 is an 8 dBi 2.4 GHz omni antenna designed for the wAP LR2 kit — extending LoRa® gateway coverage up to 3–4 km line of sight while also supporting standard 2.4 GHz WLAN. Includes a 1-metre SMA cable for remote antenna positioning and a mechanical holder for quick mast attachment. Compact, durable, and ready to deploy out of the box. The correct external antenna upgrade for any wAP LR2 deployment where the internal antenna does not provide sufficient coverage.

The MikroTik 868 Omni Antenna is a 6.5 dBi, IP66-rated omni antenna for LoRa® deployments in the 862–876 MHz band — redesigned from community feedback with higher durability, improved cable durability, and full IP66 water resistance in a smaller package. Includes a 1m SMA male-to-male cable, fastening set, and mechanical holder for 25–50 mm mast or wall mounting. Rated for marine and coastal environments. The 862–876 MHz frequency range does not cover the Canadian 915 MHz LoRa® band — confirm frequency compatibility before ordering.**

The MikroTik LDF 5 (RBLDF-5nD) is a dual-chain 5GHz outdoor wireless system designed to be mounted at the focal point of a standard offset satellite dish antenna, transforming an inexpensive readily-available dish into a high-gain long-distance wireless link. The LDF (Lite Dish Feed) has its own built-in 9 dBi antenna, but when paired with a satellite dish of up to 100 cm in diameter, total antenna amplification of up to 33 dBi can be achieved — enabling powerful point-to-point links at ranges that a conventional CPE could not reach. Supporting 802.11a/n (Wi-Fi 4) and running MikroTik RouterOS, the LDF 5 is a uniquely cost-effective solution for WISPs, network integrators, and installers who need long-range 5GHz connectivity without the expense of a dedicated high-gain dish antenna unit.