Accessories

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The RB4011 Wall Mount Kit is a secure mounting solution designed to protect your RB4011 router and its Ethernet ports in public or high-traffic areas, preventing unauthorized access and accidental disconnections.

The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.

The MikroTik G1070 is a 500W open-frame replacement power supply unit for the MikroTik CRS328-24P-4S+RM switch — delivering dual-rail DC output at 53Vdc 8.8A and 26.5Vdc 17.6A from a universal 90–264Vac input, -10°C to +55°C tested ambient temperature, ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS328-24P-4S+RM deployment where power supply failure must not result in switch downtime or an emergency parts sourcing event.

The MikroTik FTC11XG is a weatherproof IP55 10 Gigabit fiber-to-copper media converter — 1× SFP+ 10G fiber input, 1× 10/100/1000/10G RJ45 Ethernet output, Marvell 88E6193 switch chip, SwitchOS Lite with VLAN, SNMP, ACL, and traffic shaping, 64 KB FLASH, dual power input (DC jack 18–57V, 802.3bt PoE-in 43–57V), passive cooling, IP55, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes K-81 fastening set, 48V 0.95A power adapter, Gigabit PoE injector. The correct managed 10G fiber-to-copper converter for outdoor, ceiling-mount, and harsh-environment deployments where a 10G SFP+ fiber run must terminate to a 10G RJ45 device without a full switch layer, with VLAN, ACL, and SNMP management built in.

The MikroTik FTC21 is a weatherproof IP55 Fiber-to-Copper media converter with smart management capabilities powered by SwOS Lite. It bridges a single SFP/SFP+ fiber port (with 2.5G support) to a Gigabit Ethernet copper port, and goes beyond simple media conversion by offering interface monitoring, VLAN support, SNMP reporting, basic traffic shaping, and advanced Access Control Lists. Housed in a passively cooled, outdoor-rated enclosure, it is suitable for both indoor and harsh outdoor deployments. The kit includes a PoE injector, 48V power adapter, and mounting hardware.

The MikroTik GB60A-S12 is a 12V 5A internal replacement or secondary power supply unit designed specifically for the CCR1016 router series. Compatible exclusively with the newer r2 revisions of the CCR1016 that support dual power supplies, it provides a genuine MikroTik-sourced internal PSU for redundancy or direct replacement purposes. With an MTBF of approximately 100,000 hours at 25°C and a tested operating temperature range of -20°C to 70°C, it is a reliable internal power solution for CCR1016 deployments in professional networking environments.

The RBFTC11 is a robust Fiber-to-Copper media converter in a weatherproof enclosure, designed for outdoor deployments. It supports 12-57V PoE with 802.3af/at and works exclusively with Gigabit SFP connections.

The MikroTik RBGPOE-CON-HP is a rugged Gigabit PoE voltage converter that steps 48V PoE input (Passive PoE, Telecom PoE, 802.3af, or 802.3at — any 42–57V source) down to 24V Passive PoE output at up to 1A (24W) — powering any 8–30V RouterBOARD device from a 48V PoE infrastructure without a separate power adapter or injector. Two Gigabit Ethernet ports, integrated heatsink in a rugged metallic case, wall-mountable, shielded Ethernet support. The correct solution when your PoE switch delivers 48V and your RouterBOARD device needs 24V.

The MikroTik APA-1 is an automotive-grade DC power protection adapter — multi-layer overvoltage protection combining a gas-discharge tube, TVS (transient voltage suppressor) semiconductor, active polarity protection, low-pass filter, and standard fuse in a single inline adapter for MikroTik LtAP and other DC-powered devices installed in vehicle environments. Jumper-selectable output voltage with pass-through mode option. 100W max power consumption, passive cooling, IP20, -40°C to +85°C, MTBF ~100,000 hours at 25°C. CE, E-MARK, EAC, RoHS certified.